Remote Moscart Claymore

Remote Moscart Claymore

Warnings

  • Do not leave armed and unattended with a live shell in unless in game play, when entering safe zones you should either remove the shell or disarm the device and have the safety switch up.

  • Do not blind fire with this device you must have line of sight to ensure you are firing it in a safe direction.

  • Do not fire without a gassed shell in as this will cause the back plate to crack.

  • When the device fires the moscart releases a lot of gas and will push the device backwards, use at ground level only, do not use on anything it can fall off.

  • Do not leave primed in storage the rear hammer must be left released if the device is not being used.

  • Do not modify the device.

Charging

Turn on device, insert USB C charge lead. (not supplied)

The light next to charge port will turn Red when charging, Blue when fully charged.

Pairing remotes

The device should be paired with the supplied remote already.

To Add a new remote

  • Turn on device without a shell inserted.

  • Single Click the pair button on the underside of the device, Pairing led will turn blue.

  • Press button on remote and the blue led will flash 3 times and turn off, do this for up to 10 remotes.

Clearing stored remotes.

  • Turn on device without a shell inserted.

  • Press the pair button 8 times quickly and it will flash rapidly to show all remotes have been cleared.

Using your Claymore

Gas and load your grenade as you normally would.

Insert the gas grenade in to the moscart, there is a small channel at the back that holds the back of the grenade.

When you are ready to deploy.

  • Lift the striker up until it locks.

  • Turn the power on.

  • Fold the safety down 

  • When your ready to fire press the relevant button on your remote.